240p passthrough mode – prevent vertical scrolling when output to CRT

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – Feature Requests 240p passthrough mode – prevent vertical scrolling when output to CRT

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #45694
    b0nz0beavis
    Participant

    Weird use case… but sometimes for console testing and trouble-shooting various devices, it is useful to connect consoles like this:

    Console > OSSC > HDMI to VGA converter > VGA to SCART cable > CRT TV.

    Using the same HDMI > VGA > SCART > CRT with ‘direct video’ from a MiSTer has no video problems. But with the same chain coming out of OSSC the image continual scrolls upwards. Could the OSSC provide an option to add/remove the info from the HDMI output that is causing the video to scroll upwards?

    #45727
    marqs
    Participant

    Which HDMI to VGA converter is in question, and which source? Also, is the combined current draw of the converter and VGA->SCART cable less than 200mA. You could also try if the same issue occurs with 0.81 since there are a few reports indicating there might be something wrong with the metadata from 0.82 onwards.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.