Assign some more remote buttons

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Feature Requests › Assign some more remote buttons

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 24, 2018 at 4:55 PM #18706
    SirRockALot
    Participant

      Now that the overlays are printed & ready it should be your duty to immediately make them obsolete 😉

      I’d suggest the following commonly used (by me…) settings to get their own buttons:

      – Macro controls for +/- on gain and bias for R, G & B at once
      – 480p DTV/VESA toggle
      – YPbPr Rec. 601 / 709 toggle

      January 24, 2018 at 5:13 PM #18707
      nmalinoski
      Participant

        I’d definitely like to see a 480p DTV/VESA toggle, but couldn’t Rec. 601 and 709 simply be applied automatically depending on resolution of YPbPr sources?

        January 24, 2018 at 5:17 PM #18708
        SirRockALot
        Participant

          That’s what I was also thinking, but then why is it not done this way? I figured there must be a reason there is no ‘Auto’ setting. Never quite sure what the correct setting is. For instance, is a PS2 outputting in 480p or 1080i 709? What about an xbox, is it 601 on 480i and 709 in 720p? Confusing 😉

          January 24, 2018 at 5:44 PM #18709
          nmalinoski
          Participant

            I couldn’t tell you why the OSSC doesn’t have an auto setting for this, but, per Fudoh on the shmups forum, it’s straightforward:

            Remember that rec.601 (input and outputwise) is used for 240p, 480i and 480p, while .709 is used for 720p, 1080i and 1080p.

            January 24, 2018 at 5:47 PM #18710
            SirRockALot
            Participant

              If Fudoh says so I believe him 😉

              Now I really want to compare PS2 GT4 in 480p vs 1080i and XB SC2 in 480p vs 720p and see if the colors look different if I leave the OSSC on the same color space. Too bad I don’t have a capture device :/

              There should probably be an Auto setting on the OSSC then…

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.