Audio issues with SCART with the Turbografx 16

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Audio issues with SCART with the Turbografx 16

Tagged: , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 28, 2020 at 1:49 PM #39300
    Dustin
    Participant

    I have just received a Genesis Model 2 SCART cable from Retro Access:

    Genesis 2 32X/CDX RGB SCART cable with csync

    and the DB Grafx Booster TTP from Castlemania Games:

    db GrafxBooster TTP

    and I am having some issues with the audio. The picture is amazing but the audio is only coming out of the right speaker and is EXTREMELY quiet and muffled sounding. I have the current firmware installed (0.86 with audio) and I have used the OSSC with the Wii component with the 3.5 mm jack and that all worked well. I have tested the Turbografx with the OSSC on another monitor with the same results as well. Does anyone have any insight to what the problem is? Thank you.

    June 30, 2020 at 4:12 AM #39367
    Dustin
    Participant

    Ok, I have solved the issue and posting in case someone else comes across the problem. I have disconnected and re connected the GrafxBooster several times but I must have not connected them to the correct pins or it wasn’t secure enough. Either way, I re-adjusted it and video and sound work perfectly now.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.