C64 PAL to RetroTINK to OSSC config?

NewHome › Forums › RetroTink Products › C64 PAL to RetroTINK to OSSC config?

Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • Author
    Posts
  • December 26, 2018 at 7:32 PM #24506
    BuckoA51
    Keymaster

      Please do let us know how you get on.

      December 31, 2018 at 12:00 AM #24536
      LordWinston
      Participant

        Ok – good news swapping out my VIC-II chip to 6569R3 appears to have resolved the issue, no shimmer or wobble, although the image quality is not as good as when connected directly via the RetroTink2X however I think this will be down to dialling in correct settings on OSSC and tweaking the LumaFix64 pots.

        If you’re having a similar issue check to see if your VIC-II is the 8565R2 model and consider swapping it out if you can.

        December 31, 2018 at 6:21 AM #24542
        demolition
        Participant

          My problem was also with a 8565R2 machine and with another 6569 based machine there is no problem so this seems to verify your findings. Regarding the quality of 6569 vs. 8565 then I think that the 8565 in general provides a sharper image which cannot be achieved with the 6569 even with a LumaFix. With the RT2x+OSSC combo, I prefer the picture from the 8569 although it only lasts for 20 secs..

        • Author
          Posts
        Viewing 3 posts - 16 through 18 (of 18 total)
        1 2
        • The forum ‘RetroTink Products’ is closed to new topics and replies.