Custom Scanline Problem

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support Custom Scanline Problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #37975
    PRC
    Participant

    Hi, just wanted to ask why you can’t properly mix horizontal with vertical scanlines in the custom option. Here is the problem:

    – I enter to the custom scanline option
    – I set the horizontal scanline to 93%, 37%, 0% 37%, 93% (this works nice with hybrid at 50%)
    – I then go to the vertical scanline settings and enter any value, but this setting ONLY works on the one horizontal scanlines with 0% value, it does nothing on the other 4 lines, making a weird “chess board” effect.

    So what’s happening here?? In the option “horizontal+vertical” I can see a combination similar to what I want, but in “custom” doesn’t work like that. Am I missing something??

    • This topic was modified 4 months ago by PRC.
    #37979
    Harrumph
    Participant

    Yes that is exactly how it’s described to work on the wiki:

    Enables separate setting of each overlay line and column (line strength takes priority on pixels where it is >0%).

    So it seems they cannot be combined the way you want.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.