Dim red light

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Dim red light

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 25, 2018 at 6:40 AM #20377
    fumi
    Participant

      I’m getting a very dim red light when the OSSC is unpowered when connected with my current setup.

      SNES SCART > OSSC > POWERED HDMI SPLITTER > MONITOR and PEXHDCAP

      When I plug in the HDMI into the unpowered OSSC, I get a quick flash on the LCD. Probably because of the powered HDMI?

      Everything works well when I turn it on, but all these still concern me because I don’t know where the unstable sync is coming from.

      Any advice would give me peace of mind is welcome!

      March 25, 2018 at 11:18 AM #20380
      BuckoA51
      Keymaster

        Any SCART switching equipment in your setup?

        March 25, 2018 at 1:35 PM #20382
        fumi
        Participant

          No sir. Just one that connects my SNES into the OSSC as AV1.

          March 29, 2018 at 4:10 PM #20485
          zerosystem02
          Participant

            It might be your powered hdmi splitter.
            I had a problem where I was using a hdmi switch and it was giving some power to the ossc.

            March 29, 2018 at 4:38 PM #20486
            fumi
            Participant

              Thank you! That might be the case!!

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.