GPIO for profile switching?

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support GPIO for profile switching?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12732
    Quantumcross
    Participant

    Are there any pins or points I could use for some sort of digital input to automatically switch profiles? (Obviously would need to modify the firmware)

    #12734
    marqs
    Participant

    You may use microSD DAT1 and DAT2 pins since they are unused as the card is accessed in SPI mode. They are wired to card assembly and have 10k pullups.

    #12736
    Quantumcross
    Participant

    Thanks. Any chance of a third input? My switcher address bus is 3 bits. Otherwise I might just add a chip and maybe tap into the i2c bus. It looks like the easiest place to get to the i2c bus is via the LCD panel pins?

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.