Inconsistencies in Sampling Phase

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support Inconsistencies in Sampling Phase

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #24730
    Jademalo
    Participant

    I’m not totally sure what is causing this, but I’m having a very inconsistent sample phase setting.

    I have my N64 set to 90deg, and it’s super clean in the grid on the 240p test suite.
    After switching to 101deg, it still looks fine. If I then switch back to 90deg, 90 looks awful. Setting it back to 101 also looks awful.
    If I then flick it back and forward between 101 and 90, it’s a total crapshoot which it will be.

    Restarting the console also seems to be a coin flip whether or not it will be correct or incorrect. Swapping between 90 and 101 a few times will eventually get it to cooperate.

    I have no idea what is causing this, but there’s definitely something weird going on with how the sampling phase is actually being set in the OSSC.

    #24733
    Thomago
    Participant

    You have to switch “Allow TVP HPLL2x” off for the sampling phase setting to act consistent.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.