NES RGB mod Video Noise

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › NES RGB mod Video Noise

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 4, 2020 at 3:03 PM #35996
    nullifer
    Participant

      Hello,

      So I just recieved my NES back from one of the official modders for NES, one thing I noticed right away apart from the image being amazing, is that there is a decent amount of noise in the Solid colors.
      Is there some setting i can change on the OSSC to fix this? (also don’t mind crackling audio on the recording i changed that to no downsampling and it’s gone.)
      link
      https://mega.nz/#!dfQFDarA!39k44zWEUJQ_3nX2WHjOC-_DHQNMpODMbTKSykb6BGA

      March 4, 2020 at 3:21 PM #35997
      BuckoA51
      Keymaster

        I would try replacing your NES’ power supply.

        March 4, 2020 at 5:48 PM #36004
        nullifer
        Participant

          this one seemed nice, but i guess not. Any reccomendations?

          March 4, 2020 at 10:29 PM #36009
          BuckoA51
          Keymaster

            The original Nintendo model is a linear unit and so pretty good if I recall.

            Firebrand X recommends the Triad’s as a good quality switched mode PSU replacement that doesn’t add noise – https://shmups.system11.org/viewtopic.php?f=6&t=64006

            March 4, 2020 at 11:03 PM #36011
            nullifer
            Participant

              Alright, i’ll bookmark that page. thanks

              November 9, 2020 at 5:51 PM #42718
              infidelity
              Participant

                I have a video noise issue with my nesrgb. I’m using the Triad power adapter for my front loader nes, I’m using a csync cable from RGC.uk

                I dont have vertical lines/jailbars, but I have video noise, and it’s especially visible on black background. I did not install this mod myself, but I do know how to solder, is there something specifically I need to examine and adjust from the rgb mod?

                Thanks!

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.