OSSC 1.5 Audio Board Installation Instructions

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC 1.5 Audio Board Installation Instructions

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 13, 2017 at 8:32 AM #11193
    Deneteus
    Participant

      Does anyone have any pictures and instructions for installing the OSSC 1.5 audio board?

      Borti had a list of instructions for doing an install with pics and he doesn’t own a 1.5 board and has no way to post pics of a complete install. The sales page mentions you don’t have to lift pin 5 of the ITE chip and Borti’s instructions cannot be used as a point of reference.

      It seems kind of silly that this info wasn’t posted anywhere when the board was finalized and I come from a time when there were 72 wire PS2 mods and the original XBOX had 8 different mod chips floating around and people could still muddle through installs.

      I want pics from the board level and documentation where the power, ground, and SCART connector connections are listed.

      February 13, 2017 at 8:37 AM #11194
      Deneteus
      Participant

        The other thing I would like to know is how to wire an HDMI port instead of DVI because its a complete waste of an HDMI chip not to have a port on these boards, even if you had to add it yourself.

        http://www.ite.com.tw/en/product/view?mid=27

        February 13, 2017 at 11:12 AM #11195
        BuckoA51
        Keymaster

          Hi, there are some pictures here of an installation:- https://www.flickr.com/photos/65568095@N08/sets/72157680151185855/

          I don’t really see the point of swapping the DVI connector for HDMI since DVI->HDMI adapters are readily available and cost only a few bucks.

          February 13, 2017 at 12:53 PM #11201
          borti4938
          Participant

            Thanks for the pictures 🙂
            May I use copies of them to reorder and rewrite installation hints on GitHub?

            February 14, 2017 at 11:33 PM #11239
            BuckoA51
            Keymaster

              Hi Borti, yep I just got permission from the photographer, go ahead and use them anywhere you like.

              February 15, 2017 at 2:01 PM #11245
              borti4938
              Participant

                Thank you very much 🙂 I now have updated the GitHub repository. Installation for the VGP-board is provided here: https://github.com/borti4938/Audio4OSSC/tree/master/installation/v1.5_A3b_VGP

                Any suggestions, question and so on -> please contact me 🙂

                February 16, 2017 at 12:26 AM #11281
                Deneteus
                Participant

                  BuckoA51. I want to add the HDMI port above the DVI port. There are a lot of people that think that ‘DVI > HDMI’ adapters are a waste of space. They certainly cost more than an HDMI port does.

                  Thanks for updating those pics.

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • You must be logged in to reply to this topic.