OSSC 1.6 no longer outputs sound

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support OSSC 1.6 no longer outputs sound

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #26591
    Pwamh
    Participant

    I have an OSSC 1.6 that was working fine. It had 0.81a firmware so I upgraded to 0.83 today and haven’t been able to get the audio to come out of HDMI ever since.

    I have tried version 0.80, 0.81, 0.82, and 0.83 (the plain ones). I reset settings and verified HDMI (not DVI) output. I tested two SNES/N64 SCART RGBS cables and Wii component cables. Tried three different televisions and a capture card.

    Audio from SCART comes out the 3.5mm jack as expected (with the switch where it needs to be).

    I’m out of ides. Either I missed something or the ADC has failed.

    #26593
    nmalinoski
    Participant

    You need the -aud versions of the firmware. Those without the -aud suffix have no audio compiled in. That’s also what the ‘a’ in ‘0.81a’ signified, not that it was an alpha.

    #26595
    Pwamh
    Participant

    nmalinoski, you nailed it. Even the ‘a’ bit. I didn’t come across this very important info in my googling to get firmware.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.