OSSC Color issue solved

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – DIY & Repair Support › OSSC Color issue solved

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 18, 2017 at 6:06 PM #14483
    fakari
    Participant

      I have color issue.
      all settings are same but color look different 2x,3x,5x and 4x mode.
      The color are also look bit different than original.

      Chrono Trigger ps1 x2,3x and 5x
      photo IMG_20170816_211240_zps05mmdqfh.jpg

      Chrono Trigger ps1 4x
      photo IMG_20170816_211223_zpsizvondbe.jpg

      August 18, 2017 at 8:40 PM #14498
      marqs
      Participant

        Have you tried another display, and is there any anomalities on the test pattern? Assuming you’ve built a DIY kit, the typical causes for color errors are some floating traces on RGB bus (between TVP7002 and FPGA, or FPGA and IT6613E)

        August 23, 2017 at 3:42 PM #14700
        fakari
        Participant

          As I suspect, it’s just my shitty TV.
          Not the same problem on another screen.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.