OSSC Easy Case Mod

[jazzycian]

Hi all,
I fitted my audio board to my OSSC tonight. When I took it apart I noticed the middle layer of the case has OSSC cut into it. So I traced the middle piece onto a piece of red fibre board and cut out a new middle case piece with a dremel and moved the old middle piece to the top so you can see the OSSC cutout now. Don’t know how I had never noticed this cutout in the middle layer. Not sure if anyone else has done this. I think it looks quite well and the switch works quite well too sticking up through the hole. This hole may need to be reamed out a touch but it all works well. Hopefully the pictures come up here OK.

Edit:
Photos don’t show up, having trouble on the phone. But here is a link to them.
https://www.flickr.com/photos/53586980@N06/

[jazzycian]

Deleted.
Link added to first post.

If anyone here can get the photos and post it here as a reply that would be helpful. I cannot seem to get them to show up from flickr urls using the ‘img’ button.

[BuckoA51]

Looks pretty cool! Nice one 🙂

[Author]

Posts