OSSC IR reciever broken?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – DIY & Repair Support › OSSC IR reciever broken?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 13, 2026 at 1:52 AM #70922
    dinosaursr
    Participant

      Hi guys, I left my OSSC on for a couple days straight (obviously a mistake in hindsight lmao), and now the IR reciever seems to have stopped working. I know both remotes that I tested it with still work, since the IR beams show up on my phones camera, but for whatever reason I cant get either to have any input on the OSSC. When I originally turned it on, I know for a fact it was working, but I’m at an impass for what I should do. Is this a common issue with an easy fix, or should I try doing something like reflowing the reciever? Thanks!

      October 15, 2026 at 12:23 AM #70936
      dinosaursr
      Participant

        Is there any way to check with a multimeter if the IR blaster still works, or if a fuse was blown? And if its a fuse, which ones i should look out for?

        October 17, 2026 at 8:48 PM #70964
        marqs
        Participant

          If the LED doesn’t blink when you press a key of previously working remote (in case of L336, make sure it’s on “TV” preset), I’d suggest resoldering the IR diode.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.