NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC Pro Hardware KiCAD
marqs.
I was wondering if theres any plans to fully open source the OSSC Pro PCB’s ? I built a few OSSC’s a few years back and would be keen to try building a Pro at some point.
Apologies if this has been answered elsewhere, didnt see anything after a quick look around but may have missed it
I don’t think there are plans. And even if there were: there are at least two BGAs to solder… with the Cyclone V being a BGA256, which is a pain in the ass to solder without (semi)professional equipment.
You can find the open version here with description of the design status in README.
Thanks I did see that, but the readme says “Placement of the components and routing are incomplete”
I can solder and build components but my skills arent up to completing the design
I was just wondering if the complete design will ever be open sourced.
Already have a preheater and hot air station. (I repair electronics as a bit of a hobby)
The production version is not made with Kicad, thus it takes real effort to complete placement & routing of FOSS version of the PCB. It’s bound to happen at some point, but the priority is low at the moment.
NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC Pro Hardware KiCAD
marqs.I was wondering if theres any plans to fully open source the OSSC Pro PCB’s ? I built a few OSSC’s a few years back and would be keen to try building a Pro at some point.
Apologies if this has been answered elsewhere, didnt see anything after a quick look around but may have missed it
I don’t think there are plans. And even if there were: there are at least two BGAs to solder… with the Cyclone V being a BGA256, which is a pain in the ass to solder without (semi)professional equipment.
You can find the open version here with description of the design status in README.
Thanks I did see that, but the readme says “Placement of the components and routing are incomplete”
I can solder and build components but my skills arent up to completing the design
I was just wondering if the complete design will ever be open sourced.
Already have a preheater and hot air station. (I repair electronics as a bit of a hobby)
The production version is not made with Kicad, thus it takes real effort to complete placement & routing of FOSS version of the PCB. It’s bound to happen at some point, but the priority is low at the moment.
| Cookie | Duration | Description |
|---|---|---|
| _gat | 1 minute | This cookie is installed by Google Universal Analytics to restrain request rate and thus limit the collection of data on high traffic sites. |
| Cookie | Duration | Description |
|---|---|---|
| __gads | 1 year 24 days | The __gads cookie, set by Google, is stored under DoubleClick domain and tracks the number of times users see an advert, measures the success of the campaign and calculates its revenue. This cookie can only be read from the domain they are set on and will not track any data while browsing through other sites. |
| _ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
| _gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
| Cookie | Duration | Description |
|---|---|---|
| IDE | 1 year 24 days | Google DoubleClick IDE cookies are used to store information about how the user uses the website to present them with relevant ads and according to the user profile. |
| test_cookie | 15 minutes | The test_cookie is set by doubleclick.net and is used to determine if the user's browser supports cookies. |
| Cookie | Duration | Description |
|---|---|---|
| ct_checked_emails | session | No description |
| ct_has_scrolled | session | No description |
| ct_mouse_moved | session | No description |
| ct_screen_info | session | No description |
| wordpress_apbct_antibot | session | No description |
| wp_woocommerce_session_9cc3598a6315be16da4f85bb374cf6a5 | 2 days | No description |
