OSSC Pro Uart

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC Pro Uart

Tagged: ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 25, 2026 at 1:10 AM #69546
    Arkanoid
    Participant

      Hi I was wondering if anything has changed with OSSC Pro uart – is it possible to select profiles over uart via either jtag or usb? If so is it documented anywhere?

      May 28, 2026 at 4:36 PM #69580
      Arkanoid
      Participant

        Anyone know? I saw marqs posted that it was a feature he planned to add in the future, but that was couple years back so I was hoping maybe it would be possible to select profiles from the jtag hart or uart over usb by now.

        May 28, 2026 at 7:28 PM #69583
        marqs
        Participant

          Unfortunately there has been no volunteers to start working on the feature over these years. This was recently also brought up elsewhere and I promised to add basic support for input selection and profile loading in near future. Somebody less overloaded can then expand support further if necessary.

          July 6, 2026 at 3:26 PM #70051
          marqs
          Participant

            This has been now implemented for both Classic and Pro, with latter having additional support for power up/down of the unit and enable/disable of IR remote control. The functionality will be part of next respective firmware for both. USB Blaster or suitable clone is needed for accessing the UART.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.