Pass through support

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #9909

    With the power switch set to off, the incoming video signal is passed through to the connected display. Of course nothing is done to the signal, AV3 input only of course.


    The OSSC only accepts analog inputs, and only outputs digital signals. There is no physical way that it could do a passthrough. Its DVI port doesn’t even have sockets for the analog pins. Even if a new hardware revision was released that did support routing the VGA input to DVI-A RGB pins, you’d need to physically unplug the DVI cable and plug in a VGA cable via a DVI-to-VGA adapter, at which point you could have just connected your VGA source directly to the monitor…

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.