Picture Problem PAL Genesis

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Picture Problem PAL Genesis

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 11, 2021 at 5:42 PM #48765
    darkfloppy
    Participant

      Hi everyone.
      Since last monday I am a proud owner of an OSSC v1.6. This device delivers perfect picture for all my consoles except my Megadrive. The console is connected via an selfmade C-Sync RGB Cable. I use a 470 Ohm and an 220uF on the sync line. Also the rgb-lines are terminated.
      The picture is stable but there is some ghosting or rolling going on.
      Here ist a picture of my problem.
      <img src="<img src=”https://i.ibb.co/C5ZrjzS/IMG-20210811-183257.jpg&#8221; alt=”IMG-20210811-183257″ border=”0″ />” alt=”rolling ossc” />
      Greetings from germany.

      August 12, 2021 at 7:02 PM #48772
      BuckoA51
      Keymaster

        Looks too strong to be just powerline interference, try P-LL pre and post coast set to 4 though in sync menu.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.