PS2 and Xbox original hooked up with a OSSC.

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › PS2 and Xbox original hooked up with a OSSC.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 5, 2022 at 10:41 PM #53963
    Nick_NG66
    Participant

    Hi all,

    I own a Kaico OSSC 1.6 and want to connect my PS2 through the scart input and my Xbox original through the component input of the OSSC so I have both consoles connected to one monitor. What would be the downfalls of connecting my PS2 through the scart input?

    Also thinking of getting a used surround receiver which I can use to connect both consoles. Will need one with video upscaling capabilities.

    Looking for a good solution to connect both consoles to one monitor. Anyone have some thoughts on what the best solution will be?

    July 6, 2022 at 9:51 AM #53973
    BuckoA51
    Keymaster

    No downside since the OSSC can accept all signal types on the SCART input.

    I’d avoid a receiver with upscaling as this tends to be fairly limited and definitely not optimised for videogames.

    July 16, 2022 at 11:02 PM #54145
    Nick_NG66
    Participant

    Hi. A bit late reaction from me!

    Thanks for answering my question. Are there any downsides on using a PS2 with a RGB scart connection?

    July 18, 2022 at 9:14 PM #54168
    BuckoA51
    Keymaster

    No downside since the OSSC can accept all signal types on the SCART input.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.