PVM Passthrough to Tink with bnc to scart.

NewHome Forums RetroTink Products PVM Passthrough to Tink with bnc to scart.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #48136
    Robertcop
    Participant

    I got a problem with the pvm20m2 passthrough. I want to connect it to a retrotink with scart, but when I use the same scart to bnc as bnc to scart to the retrotink nothing comes through.

    #48270
    BuckoA51
    Keymaster

    Scart is (oddly) directional, if you’re using SCART to BNC input, you’d need to use a BNC to SCART (output) cable instead.

    #48281
    Robertcop
    Participant

    I kind of understand it now, I had to switch the video in to out in the female scart head. But the difference between ‘blanking ground’ and ‘video ground’ is still unclear. I got console scart cables that use either one, so they just did not care if you use extensions or switches and get problems. I mean at least the line and ground are not running along together for the length of the extension if they use the pin17 ground.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.