Remote not working anymore

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support Remote not working anymore

Tagged: 

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #23610
    exabyte
    Participant

    Hello everyone,
    I’ve been happily using OSSC for a couple of months now. Suddenly the remote stopped working.
    I’ve tried changing the batteries with some fresh non rechargable one. The IR led never blinks or seldom blink when I press a button.
    I’ve also tried reprogramming using the btn1 press on startup but no input are registered. I’ve also tried pressing the TV or the other buttons and then pressing any of the button, it didn’t work.

    Is there anything else I can try?

    Of course I’m using the “included” remote.

    Thanks a lot in advance for any help on this!

    #23611
    BuckoA51
    Keymaster

    Is the LED on the remote itself blinking?

    #23614
    exabyte
    Participant

    Thanks for the quick reply.

    Yes, the LED on the remote is indeed blinking as always.

    #23662
    exabyte
    Participant

    Sorry to insist. Do you have any updates on the possible troubleshooting for this?

    Thanks! 🙂

    #23666
    BuckoA51
    Keymaster

    any other devices in your room could be causing IR interference, VR headsets, for example?

    #23672
    exabyte
    Participant

    Thanks Bucko! It was indeed the VIVE satellites messing up with the sensor.

    That’s a very wierd and futuristic problem to have! Thanks a lot again, love the OSSC! <3

    #23684
    BuckoA51
    Keymaster
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.