Replacing IRM-V5XX_TR1

NewHome Forums OSSC & OSSC Pro OSSC – DIY Support Replacing IRM-V5XX_TR1

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #41389
    Ricardo Santos
    Participant

    I cannot find IRM-V5XX_TR1 anywhere for sale. Anybody found a place where this is still being sold?
    Does anybody here have a spare one to sell me?

    If the answers for the questions above are no. Can I replace this sensor with something like this: https://www.digikey.com/product-detail/en/panasonic-electronic-components/PNA4611M00XD/PNA4611M00XD-ND/279633

    #41396
    marqs
    Participant

    That requires 5V supply so you’d need a few extra parts too. I recommend TSOP31338 instead even though it’s not as compact size.

    #41398
    Ricardo Santos
    Participant

    Hi marqs, do you think this TSOP31338 would work on the OSSC? I mean is it just a matter of soldering it to the board? or I’d have to reprogram something?

    #41404
    marqs
    Participant

    It will work, you just have to note the different pinout when soldering it into place.

    #41480
    Ricardo Santos
    Participant

    I soldered the TSOP31338 powered the OSSC, the green LED light up and the LCD display now says “Press 1” I pressed button 1 but nothing happens.

    I think that’s not the expected behavior, I saw some videos and what should show up is “OSSC 1.6 …”
    Does that mean my OSSC is not programmed?

    #41481
    Ricardo Santos
    Participant

    I figured it out. It was just the remote wizard. I found an old remote I had and went through the wizard. Now it shows:

    OSSC fw. 0.81a
    2014 – 2018 marqs

    marqs what’s the latest firmware version and where do I check for firmware updates?

    Regards

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.