SNES C-sync Scart + OSSC -> potential strain/damage?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › SNES C-sync Scart + OSSC -> potential strain/damage?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 26, 2017 at 10:35 AM #16414
    Backslash
    Participant

    I’m a total beginner when it comes to stuff like this and I just wanted to make sure if I can use this cable or not with my OSSC 1.6. I have previously bought this SCART from ebay: https://www.ebay.co.uk/itm/Super-Nintendo-stereo-RGB-SCART-lead-SNES-CSYNC-FULL-SHIELD-GROUNDED-cable/201284360714

    Would using this scart potentially damage the OSSC?

    October 26, 2017 at 11:12 AM #16416
    Harrumph
    Participant

    If you have an NTSC SNES, then yes the cable is fine.

    October 26, 2017 at 11:45 AM #16417
    Backslash
    Participant

    Yep, I’m using an RGB modded US SNES mini and an AV famicom with the NESRGB board.

    October 26, 2017 at 12:21 PM #16424
    BuckoA51
    Keymaster

    While it (probably) wouldn’t damage your OSSC anyway, you could always ask the seller if they provide the required components for proper 75ohm CSYNC in that cable, unless these components were added to your RGB mod anyway.

    October 26, 2017 at 12:40 PM #16425
    Harrumph
    Participant

    Product description states that it is 75 ohm attenuated, so you cannot damage your equipment.

    October 26, 2017 at 1:23 PM #16428
    BuckoA51
    Keymaster

    Ah, jolly good then.

    October 26, 2017 at 1:24 PM #16429
    Backslash
    Participant

    Nice, thanks for the help, fellas

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.