SNES won’t work with OSSC?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › SNES won’t work with OSSC?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 10, 2022 at 6:09 PM #55702
    egonzalez
    Participant

      Hey all, I recently bought a ossc to use on my North American SNES and 4k tv. Currently my setup is SNES>RBG SCART cable >ossc>hdmi>TV. Whenever I turn on my ossc I always get the test greyscale screen. Is my problem with my SCART cable? I bought the North American SNES scart cable from Retro among cables based in UK. It is csync 470 ohms. Any help would be appreciated.

      November 11, 2022 at 10:23 AM #55730
      BuckoA51
      Keymaster

        You need to select the specific input the console is connected to e.g AV1 for SNES connected by SCART.

        November 11, 2022 at 2:41 PM #55735
        egonzalez
        Participant

          Yes it was still on the greyscale screen even then

          November 11, 2022 at 6:00 PM #55738
          egonzalez
          Participant

            My issue was resolved after I updated the firmware and cycled through the inputs after restarting it seems.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.