Strange Audio Upgrade Board Issue

NewHome Forums OSSC & OSSC Pro OSSC – DIY Support Strange Audio Upgrade Board Issue

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20218
    thehaxfactory
    Participant

    Posting this here because the upgrade was DIY despite my 1.5 board being ordered pre-assembled.

    The board is installed and working fine…most of the time.

    However, after about 45 minutes to an hour my audio because massively distorted.

    The mod work seems fine to me for the most part, not particularly great but should be fine.

    board image 1

    board image 2

    board image 3

    Anything glaringly wrong with the mod work?

    Had to wrap around the board rather than go through the hole to get to the pin of the oscillator but that shouldn’t really matter.

    #20228
    thehaxfactory
    Participant

    Well, I think I might have resolved it. Just played for two hours without issue. There was a bit of flux still on the board. So I guess maybe it was slightly shorting things? Not sure exactly, but after cleaning the flux off the board with an old toothbrush and some isopropyl everything seems to be good now. I’ll have to stress test it and see if it goes weird again, but I think I am all set.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.