Sync/Video issue with OSSC and Genesis

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – Discussion and support Sync/Video issue with OSSC and Genesis

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #45224
    moxfulder
    Participant

      Hello,

      When I’m connecting a Genesis to the OSSC the video output are like this:

      Video:

      View post on imgur.com

      If I set the OSSC to use Generic 4:3 on 5X it gets more clearer but still flickery.

      Before this I got problem to just get sync, but that was solved by max out Analog sync Vth (349mV).

      The cable I got looks like this:

      View post on imgur.com

      View post on imgur.com

      View post on imgur.com

      Any suggestions?
      Can this be solved by buying “The latest” version of Megadrive cable from RGC?

      #45265
      BuckoA51
      Keymaster

        That is super noisy. It may be your Genesis needs some TLC. What model is it (model 1?) any RGB upgrades (bypass board etc?). Have you tried another power supply (for the Genesis) ?

        #45274
        moxfulder
        Participant

          Its a Model 1. The seller says it works good on CRT, I have no reason to doubt him on this part.

          What is TLC?

          I bought it pre-modded with RGB Amp and Mega Amp 2.0 installed.

          View post on imgur.com

          This is what it’s look like when I set it too Generic 4:3.

          View post on imgur.com

          I’ve tested to set coast-values to 3.

          Regarding the cable, It came with a 180 Ohm resisitor I think. Could make a difference to have a 470ohm instead?

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.