brandorf

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: No Audio from HD Retrovision Genesis cable #16734
    brandorf
    Participant

      Agreed odd, changing the sampling did nothing, but on a whim I hit reset settings, then threw the switch back into the forward setting, and it seems to work fine now.

      in reply to: No Audio from HD Retrovision Genesis cable #16731
      brandorf
      Participant

        I just got my OSSC 1.6 today, and I am having the same issue, with the same cable.

        Is the TX mode setting set to HDMI? Yes
        Is the firmware version shown on startup 0.78a? Yes
        Can you make sure you have plugged the 3.5mm audio jack to the correct audio input (A1 out/A2 in)? Yes
        Can you try setting the switch to the other position, just in case? Tried both positions.
        Can you try another device connected to the OSSC to see if any sound comes through? Tried the headphone line out of my laptop, no change.
        Can you try with another monitor/TV to see if this might be a compatibility issue with this particular TV set? Neither my TV, nor my Capture device show any audio input.

        Anything else to try?

      Viewing 2 posts - 1 through 2 (of 2 total)