camyoung11

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 4, 2018 at 9:12 AM in reply to: Noob Question – PAL SNES 60hz mod #24150
    camyoung11
    Participant

      Some Awesome conversation happening, so just to make sure i’m right. I’m gonna:

      1) do the older style switch mod on my 2chip PAL SNES
      2) see if my TV will work with it
      3) If not, buy and install the dejitter mod, which should move my hz from 59.53hz to 60.08hz by tapping into the switch and then using the onboard NTSC crystal? (What Harrumph said) and might fix my issues, or at least make it more compatible for when I finally upgrade to a 4k display.
      4) Play some games 🙂

      Hope I read that right?

      Thanks guys!

      November 30, 2018 at 2:52 AM in reply to: Noob Question – PAL SNES 60hz mod #24075
      camyoung11
      Participant

        Thanks for that info Steo,

        So am I right in thinking that I can complete the switch mod, then see if my TV is susceptible to issues running slightly off 60hz, and if so, install the de-jitter mod which will bring the sync closer to 60hz which will (in theory) fix it?

        Thanks again for your help guys 🙂

        November 30, 2018 at 2:18 AM in reply to: Noob Question – PAL SNES 60hz mod #24073
        camyoung11
        Participant

          ahh, I see. I have a 2 chip – Picture quality is very high though and tracking down consoles in Australia can be a real pain, so I haven’t tried to get a 1chip.

          Thanks for your reply Bucko and Steo, Would going with the more simple mod mean that the refresh rate runs off spec? Does the SuperCIC have the same problem or does the more complicated region mod include an oscillator?

          Would installing the de-jitter mod fix the off-spec refresh rate? I noted already that you can run the de-jitter with the SuperCIC.

          Thanks again!

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)