Edenal

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 27, 2017 at 11:06 AM in reply to: Firmware v0.76 #12042
    Edenal
    Participant

      Thank you for the switch reply. I flashed it back to 0.72, same problem persists.

      The unit works perfectly when hooked up to my monitor. But not at all hooked up the the video processor. For the sake of it, I also tested multiple inputs. Same results.

      Sorry for jumping to conclusions about the firmware. If my posts causes clutter, feel free to remove them!

      March 27, 2017 at 9:41 AM in reply to: Firmware v0.76 #12039
      Edenal
      Participant

        I’m also struggling with the 0.76 firmware update. (Test system is a NTSC Genesis)

        Since the update the OSSC doesn’t work at all with my Lumagen HDP. Not even the initial test pattern.

        To confirm that my OSSC is not broken I hooked it up straight to the monitor. To confirm that my Lumagen HDP is not broken, I hooked it up to an OSSC with 0.72 firmware. Works like clockwork.

        0.76 firmware works fine with DVDO VP50 (non pro) though with identical settings. Anyone able to shed some light on what’s changed? Or if there’s any settings that can be tweaked to get the Lumagen working?

        December 29, 2016 at 1:33 PM in reply to: TV compatibility report thread #10558
        Edenal
        Participant

          I’ve tested the OSSC with the following:
          Sony KDL-55W950B, line 2x OK, line 3x doesn’t work.

          Also tested with a Lumagen Vision HDP and a Lumagen VisionPro HDP.
          Both do line2x and line3x perfectly.

          Console I’ve tested with:
          NTSC SNES, PAL Wii with 240p test suite through component, Game Gear RGB modded.

          The OSSC does not work at all with the Yuan SC542 N4 HDMI capture card.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)