[Oltonian]

As an aside, my TV can cope with Passthru and Line2x but cannot read anything else, detecting no input. Is there any workaround for this?

[Oltonian]

I’ll have a look at this and report back, thanks a lot!

[Oltonian]

Thanks – I updated firmware to v1.12 and it has sorted the timing issue. However, I’ve reinstated the settings described in the original post and I feel that the picture has become slightly worse. There’s been a clear improvement in lighting at night, but draw distances and contrast seem to have suffered. I’ve turned the samplerate up to 236 degs to compensate.

[Oltonian]

Hi Bucko,

 

Thanks so much for the quick reply. Just tested it – the green LED on the front of the OSSC stays solidly green throughout.

The white LCD screen however, flickers away to something else briefly. In normal mode it shows:

AV2_YPbPr 625-i

15.62kHz 49.99Hz

but during the blackout the ‘625’ flicked over to ‘312’ or a similar number. It definitely started with a 3.

• This reply was modified 8 months ago by Oltonian.
• This reply was modified 8 months ago by Oltonian.
• This reply was modified 8 months ago by Oltonian.

[Author]

Posts