t.rudolph

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 21, 2024 at 9:08 AM in reply to: Picure very dark #62015
    t.rudolph
    Participant

      Unfortunately I don´t have any other possibility to test this.

      However I´m using the same monitor to connect my C64 using OSSC + Koryuu and here I don´t have the problem of too dark picture.

      So I´d rule out the monitor at least.

      Is there any OSSC setting/parameter that you could perhaps recommend to twiddle around with? I´m using the Passthru mode.

      I´ve just updated firmware to 1.10, but no difference.

      June 12, 2024 at 1:32 PM in reply to: Anyone try Koryuu with Commodore C64/C128? #61905
      t.rudolph
      Participant

        Once more many thanks for the S-video cable link. I received it in the meantime and it works perfectly. The picture I get when connecting C64 via this cable to the S-video input of Koryuu and the Koryoo via 3 cinch cables to the OSSC is crystal clear.

        However I noticed that I´m missing the sound since of course S-video does not deliver audio.

        So I also ordered a cinch to 3,5mm audio cable (like https://www.amazon.de/gp/product/B00HJUD7H2) to connect the two audio lines coming from C64 through the cable recommended above into the 3.5mm AV2 audio in socket from OSSC.

         

        With this I hopefully should have everything in place to finally be able to play games on the original C64 on a modern monitor with sound.

        All the additional hardware cost most likely as much as the C64, but it was worth the ride and I learned a lot about S-video, the video format of C64 etc.

         

        Thanks again for the help and I hope my hints above might help another newbie/oldie… 🙂

         

        Best regards,

        Tobias

        June 11, 2024 at 1:42 PM in reply to: Firmware update to 1.09 failing #61897
        t.rudolph
        Participant

          Hi,

           

          sorry, it took me a while to buy a smaller card.

          That actually solved the problem: I bought a 4GB card and the update to 1.09 worked like a charm. Perhaps worth to write this as a statement into the firmware update procedure since the “usual” cards that everybody has around are getting bigger these days.

           

          Thanks a lot for your support!

          Tobias

          June 6, 2024 at 2:56 PM in reply to: Anyone try Koryuu with Commodore C64/C128? #61853
          t.rudolph
          Participant

            Hi,

            thanks for the fast response. I´m located in Germany.

            I´ve placed the order at the UK seller that you provided.

            Thanks again and hope to be able to play some old classics soon again on the original hardware. 🙂

             

            Best regards,

            Tobias

            June 4, 2024 at 3:05 PM in reply to: Anyone try Koryuu with Commodore C64/C128? #61824
            t.rudolph
            Participant

              Hi all,

               

              I just bought the OSSC and Koryuu to get my C64 connected to a modern LCD monitor.

              What I´m wondering is how you get the C64 connected to Koryuu? I was trying to find a 8pin DIN to S-video cable but couldn´t find any.

              Are all of you technically so experienced that you solder and build your own cables or does anyone have a link where I could buy one?

               

              Best regards,

              Tobias

              May 28, 2024 at 5:16 PM in reply to: Firmware update to 1.09 failing #61756
              t.rudolph
              Participant

                Hi,

                 

                I´ve ordered OSSC from the official website (https://videogameperfection.com/products/open-source-scan-converter/?sld=retrorgb)

                 

                Best regards,

                Tobias

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)