Rave

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Pc Engine NTSC / Turbografx PAL NO SYNC at all? #20571
    Rave
    Participant

      Ok,

      I managed to get it working, it turns out the db-grafx booster doesnt actually work on my normal TV after all, s-video and composite from it are fine, but the RGB output briefly displays a picture then fades to black on both the NTSC and PAL consoles.

      The cheapie ebay one works perfectly on the TV and with the cheapie scart to HDMI.

      I wired up the cheapie to the OSSC directly and it then just worked, I made sure LPF was set to max.
      I tested through the scart switch I have and its still good, the only time it doesnt work is if i have 2 scart switchers in series but i guess thats good old fashioned signal degredation going on.

      The sync is definitely better using the packapunch cable rather than the standard cable, so i will continue to use this setup and ditch the db-booster (even though it was more pricey!).

      Thanks for the heads up, and hopefully the info will help someone else.

      in reply to: Pc Engine NTSC / Turbografx PAL NO SYNC at all? #20569
      Rave
      Participant

        Hi Harrumph,

        Thanks for the reply, I do have a scart switch, but I have also tried both consoles and devices connected directly to the OSSC.

        I will have a look at the LFP and threshold as suggested and see if it make a difference.

        Thanks.

        in reply to: how to connect with Amiga CD32? #20562
        Rave
        Participant

          You can just buy an RBG cable from amigakit.co.uk, no modification required.

          You will need either an RGB adapter from beavis on amibay, or the TF328 as mentioned above, but make sure you get the kit with the riser from supaduper on amibay as it already has the 23pin RGB connector built in.

        Viewing 3 posts - 1 through 3 (of 3 total)