RodrigoHC13

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 4, 2020 at 5:19 PM in reply to: scaling filters #39510
    RodrigoHC13
    Participant

      @Bum2kev , someone on the shmups forum have the file, but you will need to ask for him. This user “naz” posted it on “Mar 15, 2020”, but the upload has expired. https://shmups.system11.org/viewtopic.php?p=1403156#p1403156

      June 27, 2019 at 2:31 PM in reply to: Sync compatibility in Monitors with FreeSync #26803
      RodrigoHC13
      Participant

        All right! I’ll be referring to the questions in a different order now:

        3. Understood now. Then a Freesync monitor needs a equipment designed to work with it. But I still have doubts if a Freesync monitor (even receiving signal from a device that wasn’t designed to work with the Freesync technology, like the OSSC), if compared to a regular monitor without this technology, will be equally or higher tolerant when dealing with fixed but unusual refresh rates.

        And considering this information:

        1. Can I conclude that the compatibility with unusual refresh rates isn’t improved by the Freesync, but by the “more forgiving with refresh rates” characteristic that many monitors have?

        2. Right, now I understood that during the 240p<->480i transitions the OSSC will blackout for a short period of time. Let’s not consider possibilities of changing the HDMI port, only considering what is possible with the v1.6 and accepting the OSSC inherent “blackout time”. Assuming that the recovery time from this “blackout” varies on different TVs/monitors, would this resync time be better on models with Freesync, even in a device that isn’t designed to work with this technology, like the OSSC? Or this is not what determines the better resync times on these monitors?

        Thanks!

        June 26, 2019 at 11:38 PM in reply to: scaling filters #26795
        RodrigoHC13
        Participant

          @redguy_ Question about the custom firmware based on 0.77:


          @Harrumph           said that “it needed to be a custom fw at the time due to memory constraints (some other function had to be left out).”

          Is there a chance to implement these filters on newer versions of the firmware, mantaining functions like the hability to save profiles and the implementations that make the OSSC 1.6 work with the HDMI out?

          Thank you!

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)