Ruud85

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 20 total)
  • Author
    Posts
  • in reply to: OSSC Profiles for PAL users #48388
    Ruud85
    Participant

      But then it’s still weird that on the settings that do work my everdrive doesn’t

      in reply to: OSSC Profiles for PAL users #48386
      Ruud85
      Participant

        hi everyone

        i hope im in the right topic here
        i have a rgb modded pal n64 fra this is hooked up to my ossc with an original snes rgb cable. im using a phillips 4k tv
        for some reason the n64 only works at line 3 4 and 5 only on generic modes

        i tried the json n64 pal profile but then i had to chance it back to generic to get any signal

        i also have a n64 everdrive V3.02 (2014) wich doesnt work at all on all settings i have tried

        when i use an older tv (with scart input) it works just fine with only the rgb cable or trought the ossc

        i hope some of you guys can help me out here

        (sorry for the bad english im from holland 🙂

        in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24620
        Ruud85
        Participant

          Snes de-jitter instalation service

          When I click this it says item not in stock

          Also I send a direct email and they were saying it will come back in 2019

          So I just have to wait until I see its back available

          Also I want to let my pal n64 modded so I can use rgb with that to

          But I wonder if when I use a scart splitter and hook up rgb cables of my snes n64 and ps2 if they al run on the same settings as the snes takes a lot of adjustment in the ossc

          in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24617
          Ruud85
          Participant

            Yes thx i have sound again
            I got the wrong one installed

            Now it’s waiting for the de jitter mod getting back in stock

            in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24615
            Ruud85
            Participant

              I just tried another TV and it’s the same problem
              No sound

              But when I plug my snes rgb cable in tv it does give me sound

              Is my ossc broken ?

              in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24614
              Ruud85
              Participant

                I did a firmware update install 0.82
                Still no sound:-(
                Everything else works (on 50hz)
                Also my ps2 with rgb cable has no sound

                Why is this all so complicated

                in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24613
                Ruud85
                Participant

                  Ah ok so that’s the sound problem
                  So I just need to reinstall the latest firmware version then?

                  in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24610
                  Ruud85
                  Participant

                    It was working fine before so don’t think it’s the wiring

                    I thought I set something wrong in the ossc but when I reset the settings to stock I still don’t have any sound

                    I’m gonna order a super nt today
                    Saw Verry good reviews

                    I think it’s just a bit lame the ossc don’t support snes properly and also hooking up a Nes and n64 is a problem

                    Mebe when the de-jitter mod is back in stock I will give it another go
                    Until that time I can play on the super nt

                    in reply to: OSSC + SNES dejitter mod +Sony 4K = Success! #24601
                    Ruud85
                    Participant

                      I can’t wait to send my pal 60hz modded 1 chip snes for a de jitter mod so I can also play 16% faster

                      I tried your setting but It ain’t working without the mod

                      Al of sudden I don’t have sound anymore
                      When I change the setting to factory it still won’t come back

                      Can someone tell me what to do please

                      in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24507
                      Ruud85
                      Participant

                        Ok so I downloaded win32 disk imager and write the test firmware to sd card and installed on the ossc

                        Then when I select test 1 > 5 I got the gray test patern on my TV

                        When selecting test 6 > 10 I got the moving checked flag on my TV

                        Is this the correct thing i want to see ?

                        So when I give my snes the de-jitter mod will I be able to play it on 60hz?

                        Hope to hear from you guys

                        in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24504
                        Ruud85
                        Participant

                          I’m gonna try this asap
                          and hoping my TV supports these tests

                          Can I just leave this test firmware on my ossc when I’m done with these tests?

                          If I have further questions when trying to test I hope you guys will answer them 🙂

                          in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24495
                          Ruud85
                          Participant

                            And this jitter mod you guys talk about
                            Is this 100% guaranty that it will fix the refesh problem?
                            And what are the costs of this
                            I live in the Netherlands so I have to send my console to someone?
                            If so mebe I also can let my Nes and n64 mod to rgb as well

                            in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24493
                            Ruud85
                            Participant

                              I got another philips full HD TV from about 10 jears old this one has many scart and hdmi inputs
                              and on this TV I can hook up al my systems as nes snes n64 ps1 > ps4 wii etc

                              If I try the ossc on this TV with my snes on 60hz it will work just fine on Linemult mode 2 > 5
                              Mode 4 looks best

                              So I can conclude that my newer philips 4k just hates old consoles
                              and never gonna let me play them properly as I want on 60hz

                              in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24491
                              Ruud85
                              Participant

                                When setting tx mode to dvi it still flickers and my sound is gone
                                I got a 5.1 speaker set hooked up to my TV with optical cable

                                Can there mebe in the future be some sort of software update for the ossc that fixes this problem?

                                Also I can’t play my Nes and n64 with the ossc
                                That’s I big disappointed for me

                                in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24488
                                Ruud85
                                Participant

                                  I don’t think a mod is not optional for me

                                  You think I get the same problem when using a framemeister?

                                Viewing 15 posts - 1 through 15 (of 20 total)