Ruud85
Forum Replies Created
-
AuthorPosts
-
But then it’s still weird that on the settings that do work my everdrive doesn’t
hi everyone
i hope im in the right topic here
i have a rgb modded pal n64 fra this is hooked up to my ossc with an original snes rgb cable. im using a phillips 4k tv
for some reason the n64 only works at line 3 4 and 5 only on generic modesi tried the json n64 pal profile but then i had to chance it back to generic to get any signal
i also have a n64 everdrive V3.02 (2014) wich doesnt work at all on all settings i have tried
when i use an older tv (with scart input) it works just fine with only the rgb cable or trought the ossc
i hope some of you guys can help me out here
(sorry for the bad english im from holland 🙂
Snes de-jitter instalation service
When I click this it says item not in stock
Also I send a direct email and they were saying it will come back in 2019
So I just have to wait until I see its back available
Also I want to let my pal n64 modded so I can use rgb with that to
But I wonder if when I use a scart splitter and hook up rgb cables of my snes n64 and ps2 if they al run on the same settings as the snes takes a lot of adjustment in the ossc
Yes thx i have sound again
I got the wrong one installedNow it’s waiting for the de jitter mod getting back in stock
I just tried another TV and it’s the same problem
No soundBut when I plug my snes rgb cable in tv it does give me sound
Is my ossc broken ?
I did a firmware update install 0.82
Still no sound:-(
Everything else works (on 50hz)
Also my ps2 with rgb cable has no soundWhy is this all so complicated
Ah ok so that’s the sound problem
So I just need to reinstall the latest firmware version then?It was working fine before so don’t think it’s the wiring
I thought I set something wrong in the ossc but when I reset the settings to stock I still don’t have any sound
I’m gonna order a super nt today
Saw Verry good reviewsI think it’s just a bit lame the ossc don’t support snes properly and also hooking up a Nes and n64 is a problem
Mebe when the de-jitter mod is back in stock I will give it another go
Until that time I can play on the super ntI can’t wait to send my pal 60hz modded 1 chip snes for a de jitter mod so I can also play 16% faster
I tried your setting but It ain’t working without the mod
Al of sudden I don’t have sound anymore
When I change the setting to factory it still won’t come backCan someone tell me what to do please
December 26, 2018 at 9:49 PM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24507Ok so I downloaded win32 disk imager and write the test firmware to sd card and installed on the ossc
Then when I select test 1 > 5 I got the gray test patern on my TV
When selecting test 6 > 10 I got the moving checked flag on my TV
Is this the correct thing i want to see ?
So when I give my snes the de-jitter mod will I be able to play it on 60hz?
Hope to hear from you guys
December 26, 2018 at 4:52 PM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24504I’m gonna try this asap
and hoping my TV supports these testsCan I just leave this test firmware on my ossc when I’m done with these tests?
If I have further questions when trying to test I hope you guys will answer them 🙂
December 24, 2018 at 2:57 PM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24495And this jitter mod you guys talk about
Is this 100% guaranty that it will fix the refesh problem?
And what are the costs of this
I live in the Netherlands so I have to send my console to someone?
If so mebe I also can let my Nes and n64 mod to rgb as wellDecember 24, 2018 at 2:29 PM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24493I got another philips full HD TV from about 10 jears old this one has many scart and hdmi inputs
and on this TV I can hook up al my systems as nes snes n64 ps1 > ps4 wii etcIf I try the ossc on this TV with my snes on 60hz it will work just fine on Linemult mode 2 > 5
Mode 4 looks bestSo I can conclude that my newer philips 4k just hates old consoles
and never gonna let me play them properly as I want on 60hzDecember 24, 2018 at 11:57 AM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24491When setting tx mode to dvi it still flickers and my sound is gone
I got a 5.1 speaker set hooked up to my TV with optical cableCan there mebe in the future be some sort of software update for the ossc that fixes this problem?
Also I can’t play my Nes and n64 with the ossc
That’s I big disappointed for meDecember 24, 2018 at 8:59 AM in reply to: No Signal (possibly related to sync issues?) – SOLVED! #24488I don’t think a mod is not optional for me
You think I get the same problem when using a framemeister?
-
AuthorPosts