Spbmlb10
Forum Replies Created
-
AuthorPosts
-
Sorry for the slow reply, I had been very busy of late with my young bloke and work so havnt had much time to fiddle with things. I decided to scrap the HDMI -> VGA convertor and plug directly into the projector again. I was using the passthrough on an amplifier but i worked out it wasn’t actually passing it through untouched and was intact changing the original resolutions. I can now get 5x lines with adjusting the resolution on the OSSC. Pretty happy with that. I really do appreciate everyone’s help as well.
The issues I also were having with the Famicom AV and Super Nes flickering has also been solved. It mush have been the amplifier not liking them.
Pretty happy to say it looks pretty good on a 120inch screen at 5x. I’ll post some pics up later today as I should finally have some time to game as I havnt played a single one since it’s been working.
Cheers again
I have attached two images from my projector info. First one is in 2x mode
Second pic is of Passthrough mode, not 15khz. If it was true passthrough wouldn’t it be 15khz or is the projector picking up the signal but processing it as 60khz?
No jitter in this mode but looks quite blurry as the ossc isn’t doing its magic. As soon as I get 2x to 5x it’s there and less prevalent in 5x mode. But still noticeable?
I’ve tried adjusting the tracking and sync menus on my projector and they don’t touch the jitter?
Is it possible the hdmi to vga adapter is causing this? I have tried two different brands and both display the jitter in 2–5 X modes?
Thanks for trying to help, do you suggest anything else I could try??
Yeah Picture 2
It wasn’t on DVI so I switched it but it’s still the same. In passthrough mode it doesn’t have the jitter but in 2X 3X 4X and 5X the jitter is there. This is getting so frustrating, any more ideas?
Please
I think I did try that, but I’ll have to have another look at it to make sure
Yeah I have tried 2x 3x 4x 5x all showing it to some degree.
Thanks Bucko for your reply mate, mmm Image jitter. I wonder how I can rectify or try to eliminate some of this. It’s doing my head in. I havnt been able to really use the unit properly. Does anyone else have any ideas?? Thanks
When playing the battle toads levels the sync is fine only during the cut scenes and intro is it actually having issues. So does his mean I would need one of these boards when finalised?
I’ll test it today and report back. Thanks
Thanks for the info, I actually tried the search function but wasn’t exactly sure what I was searching for. Do you know when these boards will be available?
Just a question, I have ordered two of these units at two differnt times. Can you confirm if any have been posted or if they were both in the last few 100 units: I have a feeling that one was ordered in the last 100 and one prior to this. Just wanted to check. Thanks
I appreciate the replies, now to wait for them to be shipped. Looking forward to this!!!
-
AuthorPosts