criger

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 17, 2020 at 8:10 AM in reply to: .86 bug? PS1 Line 5x no longer works #42190
    criger
    Participant

      I too have experienced issues with 0.86

      Firmware 0.86 – bad image quality

      Downgrading to 0.85 solved the problem in my case.
      I’m willing to bet quite a lot on 0.86 being a faulty version based on several reported issues with it..

      September 28, 2020 at 6:24 PM in reply to: any interlaced signals -> OSSC passthrough -> capture card = sound stutter #41603
      criger
      Participant

        A workaround to this issue (for others that might experience the same):

        Elgato doesn’t support 480i or 576i sources without some issues.
        As a workaround to this problem (in my case, this applies ONLY for footage capturing as the image on the TV will probably look crappy as hell..!):

        1. Enable line2x (bob-deinterlacing) on the OSSC to make the output be recognized as progressive instead of interlaced (but with the bobbly effect of bob-deinterlacing).

        2. In OBS Studio, right click the source –> deinterlacing –> Choose Blend or Yadif.

        This will remove a lot of the bobbly stuff with bob-deinterlacing and the captured video will much better in addition to not having any stuttering sound in the recorded video.

        I’d guess this solution would be applicable to other capture cards as well.

        September 12, 2020 at 10:34 PM in reply to: Firmware 0.86 – bad image quality #41321
        criger
        Participant

          Yes, I forgot to mention that I’m running PAL.

          My mistake 🙂

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)