[legolas119]

ah ok, thank you for you feedback. Well, I will evaluate if mod it with the RGB of buy Koryuu, more or less the cost is the same. Thank you again 🙂

[legolas119]

you are right, but unfortunately it is not easy to find an already modded NES…
But i found here in europe (UK) a shop that can mod the NES for 99£ + shipping (I don’t know if I can write here the name of the shop). It could be really faster and not so expensive this way because i live in europe too (italy). If I have to ship the NES in USA it will be really expensive for me 🙁

[legolas119]

understood.
Well I would like to have the best video quality on my crt tv and also to have this quality when i will use the nes on my hdtv with OSSC (or OSSC pro).
Do you think that modding my console with the RGB kit I could damage it?

[legolas119]

ah ok, this one: https://videogameperfection.com/products/koryuu-transcoder/
well, my NES currently has this cable: from one side there are the red/yellow/white pin connected to the console. From the other side there is a SCART connected with my crt tv.
I suppose that if i buy a Koryuu transcoder, i also need a correct cable to connect my console to Koryuu and then from Koryuu to OSSC. I don’t know, but probably the total cost, more or less, will be the same as I would mod my Nes with an RGB connection. Are you agree?

thanks!

[legolas119]

thanks, I sent them an email… I don’t have any kit for NES..I asked them if it is also possible to mod it in order to run PAL games at 60hz (like USA console) and in addition i would like to play USA cartridge, if possible.

[legolas119]

ah ok, but currently I don’t know who could modify my PAL nes to RGB output, it is a not simple mod…and I don’t know any shop or something like that that could mod it…

[legolas119]

currently I use RGB scart cable for every console. Of course, only NES doesn’t have the RGB scart cable unfortunately because it isn’t supported, so I’m using a component scart cable that is the best option I think.
But I read that current OSSC doens’t support NES because it has 240p signal: is it still true?

[legolas119]

ok thank you!
Do you know when it will be released?

[legolas119]

aaah ok, i need not only the RetroTINK 2x but in addition and RCA cable like this: https://www.ebay.it/itm/303055036379?ul_noapp=true
Currently i only have a scart cable for my nes in order to connect him to my crt

Excluding NES, all my others console shoudl work correctly with OCSS by default, correct?

[legolas119]

thanks. Yes i know that scart is only a connector 🙂
I read here https://videogameperfection.com/2018/07/23/retrotink-the-verdict/ that it could be possible to use OSSC with NES if i take one of this: https://videogameperfection.com/products/hdmi-to-vga-adapter/
But my NES as i said has a scart connector. Whcih connecto i can buy in order to use my NES with OSSC?

thanks!

[legolas119]

1) yes, my pc engine too is modded in order to have a SCART RGB output. My NES has a scart output but not RGB because the NES can’t have the RGB output in any way. The NES can only have the Video Composit + Audio output.
Do you think that the scart output is enough in order to correctly run NES and PC Engine with OSSC?
2) perfect
3) I would like to buy a Sony lcd 4k. I still not know if an oled screen (AF8/AF9 model) or a lcd (XF9005 model).I’m comparing them with the video image that i could have with OSSC in my current Toshiba fullHD. I mean: the image quality upscaled on a 4K lcd with OSSC is worse than a fullHD lcd?

thanks

[Author]

Posts