Nehalem501
Forum Replies Created
-
AuthorPosts
-
December 29, 2020 at 4:20 PM in reply to: [Solved] Image too bright (clipped) when using AV2 YPbPr input #44070
After some troubleshooting I’ve managed to find the source of the problem.
The R9 resistor was badly soldered, the missing connection was on the ground side this is why I still had a visible image.December 28, 2020 at 7:00 PM in reply to: [Solved] Image too bright (clipped) when using AV2 YPbPr input #44053I’ve managed to solder most of the surface mount components, however I’m stuck with the “ESD Suppressors / TVS Diodes”. I tried to solder one, I’ve managed to destroy it instead of soldering it. The images that d0pefish posted are not accessible.
Could someone help me ? I’m also looking for a place when I could buy one of these without a minimal order amount, as I don’t have anything else to order on mouser …Hi d0pefish, if you still have them, I’d like to buy a sensor from you.
I’m interested by the remote as well because I forgot to order one with the kit. I’m from France so shipping shouldn’t be too expensive.Nice find !
For NCP703SN19T1G it seems available on eBay http://www.ebay.com/itm/5PCS-NCP703SN19T1G-IC-REG-LDO-1-9V-0-3A-5TSOP-703-NCP703-/192136182252?hash=item2cbc3579ec:g:2X4AAOSwuLZY0We7
So the only remaining totally unavailable part is IRM-V538/TR1 (even on eBay I couldn’t find it)
Ok so I started looking for alternatives for the missing parts:
- MCT06030C1000FP500 -> Part with identical specs here
- CRCW06031K50FKEA -> Part with identical specs here
- GRM188R61C105KA93D -> Part with (almost) identical specs here (the only difference is that this one is 0.1mm higher)
- NCP703SN19T1G -> Couldn’t find an alternative
- R30-1611200 -> Couldn’t find an alternative
- 163-179PH-EX -> Couldn’t find an alternative
- IRM-V538/TR1 -> Couldn’t find an alternative
Great news to hear ! Thanks 🙂
-
AuthorPosts



