Syxx

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 5, 2019 at 9:06 PM in reply to: Capture card compatibility report thread #25491
    Syxx
    Participant

      After going through a ton of hardware I have a setup that is working very well with the SNES.

      The Startech USB3HDCAP will take 2x,3x,4x. Just make sure you set the HDMI bandwidth to either 125% or 150% in the settings. It won’t take 5x from the SNES, but will take 1080p from other sources. Don’t use the “custom” drivers. Just grab the latest ones off of the website.

      One other thing about this card, is that it does NOT like ASmedia USB controllers. So if you have those in your computer, you’ll need to buy a PCI-E USB 3.0 card. I ended up getting a EVGA USB 3.0 controller from a friend pretty cheap. It works just fine with built in windows drivers.

      More importantly was finding a splitter that works with this setup. I tried out several and had mostly bad luck. Mainly audio stuttering. I ended up with the ViewHD Model: UHD1X2. This seems to take about everything that I throw at it. You’ll want to put it in Out1 EDID mode. This way it only sees the EDID from the display and not from the capture.

      March 5, 2019 at 8:50 PM in reply to: TV compatibility report thread #25490
      Syxx
      Participant

        LG 43UK6500AUA
        x2 Works
        x3 Works
        x4 Works
        x5 Works
        SNES Works

        I actually haven’t found any configurations that won’t work with this TV. 5x 1920×1080, 1600×1200, 1920×1200 all work fine, even with SNES. I assume the same would be true with the other models 43UK6300 and 43UK6100.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)