tp

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 5, 2019 at 10:05 PM in reply to: Acer GN246HL – Aspect Ratios and Issue with Line5x (SNES) #25760
    tp
    Participant

      I haven’t tried my N64 or GameCube yet but I’m pretty sure neither output RGB natively. You’re right about the cropping part I’m just curious as to why it doesn’t work for me. My concern at the moment are these little flashing half pixels I’m getting though. I’m hoping it’s a setting on my OSSC that can be tweaked to fix it. Any idea what it is?

      April 4, 2019 at 9:38 AM in reply to: Acer GN246HL – Aspect Ratios and Issue with Line5x (SNES) #25752
      tp
      Participant

        Would a de-jitter modification possibly fix Line5x not working with my display? Wondering if this is the reason it doesn’t want to cooperate.

        March 26, 2019 at 2:13 AM in reply to: How do I get the audio to work? #25687
        tp
        Participant

          I’d like to second that the audio coming out of the 3.5mm jack is also too loud for me as well, but it’s the only option for my current setup. I have to turn down the Line-In on my PC about 50% for the OSSC compared to my other consoles. I saw that there was an option for volume gain adjustment in the documentation but my assumption is that it’s only for the separate audio board upgrade used for sending audio through DVI/HDMI. Is there a way to adjust the volume that I’m missing?

          March 14, 2019 at 11:23 AM in reply to: Acer GN246HL – Aspect Ratios and Issue with Line5x (SNES) #25592
          tp
          Participant

            I did try those different resolutions but they didn’t work either. Sucks my display can’t support it but at least Line4x works fine. I’ll keep checking for any developments made in the future. Thanks.

            March 13, 2019 at 9:59 PM in reply to: Acer GN246HL – Aspect Ratios and Issue with Line5x (SNES) #25580
            tp
            Participant

              Alright, so I’ve been content playing games using Line4x for awhile but I’d like to try and make Line5x work now, especially since my capture card has finally arrived. I just updated my firmware to 0.82 a few minutes ago but I’m not sure if that changes anything specifically for the SNES. Haven’t had any luck trying the various tweaks for Line5x advanced timings. Attempting to use Line5x, the screen will display black most of the time, while some of the tweaks make it flash ‘Input Not Supported’ randomly. Any suggestions?

              Edit: My profile settings were lost after updating the firmware. Not sure if this is intended. Thankfully, I remembered the setting fixed the signal cutting out randomly.

              February 24, 2019 at 8:33 PM in reply to: Acer GN246HL – Aspect Ratios and Issue with Line5x (SNES) #25392
              tp
              Participant

                Thanks! That makes perfect sense now. Appreciate the help.

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)