Wiz

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 13, 2022 at 1:56 PM in reply to: DExx-vd_isl beta fw 0.58 #54091
    Wiz
    Participant

      Silly me, it makes more sense now. I confirm flash writes work in AS mode. Thank you for the quick reply !

      July 13, 2022 at 1:24 PM in reply to: DExx-vd_isl beta fw 0.58 #54088
      Wiz
      Participant

        Getting an issue when attempting to write on flash, it seems, so I’ll report what I did in details in case I did anything wrong.

        – Set DE10-Nano in AS Mode by toggling SW10 switches 4 and 5.
        – Programmed DE10-Nano with .jic file :
        At first I had an error saying something like “Expected 1 device but there are 2 devices”.
        My solution was to use auto-detect, remove the device’s initial entry to avoid doubles, and programming worked.
        – Unplugged DE10-Nano, then set it back to default mode by toggling SW10 switches 4 and 5 back in their original position. <– DE10-Nano should stay in AS mode
        – Started DE10-Nano : I noticed that the profile load/save feature was not there so I figured I should have updated the .rbf file for that.
        – Got latest .rbf file which was updated on the repository indeed, and now I see the profile save/load feature, as well as the IR binding feature. Nice !
        – Tried IR binding feature : OSD hangs as soon as I confirm IR code for the last key entry (“PROFILE_HOTKEY”).
        Same behaviour from OSD or from pressing KEY0 at start. When OSD hangs, KEY1 doesn’t go back anymore either.
        So looking at controls.c I see this call for write_userdata() and I suspect an issue on flash write.
        – Tried profile save : same behaviour, OSD freezes, so flash write seems to be the issue.
        Did I program the .jic improperly ?

        On a side note, this may have no relation but oddly enough, I don’t get RGBS sync anymore, from any of my consoles.
        The sound is properly captured and transmitted to HDMI, but no image anymore, just NO_SYNC.
        I tried to revert back to previous firmware by putting previous .rbf file on SD card but this didn’t trigger an update, as I still had the new IR binding and profile load/save features available. I got back to current .rbf file on SD card now.

        I’ll be available to try things if needed, and sorry in advance if I just did something wrong ! 😀

        July 13, 2022 at 12:44 PM in reply to: DExx remote compatibility – OSSC clones don’t necessarily use same IR codes #54086
        Wiz
        Participant

          Thank you very much !
          I confirm the KEY0/1 behaviour works as expected so that should definitely solve that kind of problem for anybody having an OSSC remote with unexpected IR codes.

          I’m currently having a more global issue with the beta firmware however (menu freeze when writing on flash, be it control setup or profile save) so I’ll report it in your beta thread.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)