TV compatibility report thread

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › TV compatibility report thread

Viewing 15 posts - 31 through 45 (of 429 total)
1 2 3 4 … 27 28 29
  • Author
    Posts
  • November 3, 2016 at 4:24 PM #9384
    eric90000
    Participant

      Tested these 3 European TV’s today (Ireland). Was surprised to see 2/3 accept line 3x mode.

      Samsung UE32J5100AK – | Lx2 YES| Lx3 YES| SNES (not yet tested)

      LG 47LD450-ZA – | Lx2 YES| Lx3 YES | SNES YES

      Sony KDL40W705CBU – | Lx2 YES| Lx3 NO | SNES YES

      November 8, 2016 at 10:06 AM #9473
      BuckoA51
      Keymaster

        Good to see Sony’s accepting the SNES, thanks to Marqs hard work way more sets accept it now.

        November 8, 2016 at 11:48 PM #9486
        markiemarcus
        Participant

          Hisense H49M3000

          480p LineX2 works.

          November 9, 2016 at 8:42 PM #9500
          Harrumph
          Participant

            Seems my first post is locked out of editing again, can you extend it again Bucko? Cheers!

            November 10, 2016 at 10:35 AM #9511
            zz99
            Participant

              Just like to say thanks Marqs for an excellent product

              I’ve tested a couple of TV’s with a JPN Saturn and Neo Geo CDZ (no SNES)

              Sony Bravia KD49X8005C |Lx3:Y|
              Hisense LTD40K321UWTSEU |Lx3:Y|

              November 15, 2016 at 12:02 AM #9592
              Harrumph
              Participant

                @markiemarcus, I assume you mean 480p x2 works in addition to 240p x2, or?

                November 21, 2016 at 10:40 AM #9774
                b0nz0beavis
                Participant

                  I just edited my entry from page 2, cleared it up and added another set I tested today.

                  November 21, 2016 at 12:35 PM #9778
                  Harrumph
                  Participant

                    Cheers, I had missed to add your sets to the summary, thanks for letting me know!

                    November 22, 2016 at 1:26 AM #9802
                    BuckoA51
                    Keymaster

                      Starting to (slowly!) add this information to the Wiki too, keep the reports coming!

                      November 22, 2016 at 8:45 PM #9819
                      RetroRGB
                      Participant

                        The ASUS MG24UQ is a small 24″ monitor that’s compatible with both x3 and SNES. I tested it against a CRT and it consistently had less then a frame of lag; Sometimes .5, sometimes closer to 1, but never over. It actually looks great and scanlines line up well: https://www.asus.com/us/Monitors/MG24UQ/

                        Supposedly the 28″ version has even less lag, but I don’t have access to one for testing.

                        November 23, 2016 at 8:54 AM #9826
                        ShootTheCore
                        Participant

                          Samsung HL67A750
                          2X Yes
                          3X No
                          SNES Yes

                          November 24, 2016 at 5:54 PM #9867
                          ShootTheCore
                          Participant

                            Samsung HG32NC690
                            2X Yes
                            3X Yes
                            SNES Yes

                            November 24, 2016 at 11:35 PM #9885
                            sonofmail
                            Participant

                              SONY 47W805A

                              2X YES
                              3X NO

                              Can not adjust Advanced Timing Settings either.
                              To make it work perfectly i have to change Analog sync LPF to the Max (2.5MHz: Heavy filtering); if not, it gets out of sync ocasionally. It cames and goes.

                              November 26, 2016 at 12:20 AM #9901
                              bkbreyme
                              Participant

                                Here’s a cheap model that seems to work with everything I throw at it using the OSSC:

                                TCL 40FD2700 40-Inch 1080p LED TV
                                Line X3: Yes
                                Super NES Line X3: Yes
                                480P LineX2: YES!

                                Maybe other TCL models have similar compatibility?

                                November 26, 2016 at 12:11 PM #9919
                                arovane
                                Participant

                                  Panasonic TX-P55VT50Y

                                  x2: yes
                                  x3: no
                                  snes/nesrgb: no
                                  neo-geo: no

                                  Other systems work fine.

                                  A shame really that snes, neo geo and line triple doesn’t work, cause this tv has amazing picture quality for retro-gaming.

                                • Author
                                  Posts
                                Viewing 15 posts - 31 through 45 (of 429 total)
                                1 2 3 4 … 27 28 29
                                • You must be logged in to reply to this topic.