L-Digital

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • September 8, 2016 at 10:10 PM in reply to: Firmware 0.73 #8789
    L-Digital
    Participant

      If this is normal I think if there were profiles for each input I could route the neo geo via av3 so it has its own set of custom settings.

      Do we know when profiles will be available?

      September 8, 2016 at 9:49 PM in reply to: Firmware 0.73 #8788
      L-Digital
      Participant

        After a bit of testing it seems that I can’t get a situation where one problem does not replace another. It seems that adjusting the h-pll post coast 2+ which is required to straighten the top of the screen on neo geo causes snes to intermittently desync for a split second ever now and then. is this a bug or something that can be worked out?

        September 5, 2016 at 6:56 PM in reply to: Firmware 0.73 #8755
        L-Digital
        Participant

          Hey it works!

          Thanks for putting this together

          I it works as low as 8.30us on the MV-1FZ

          All my consoles now work 100% now

          Thank you marqs!

          August 28, 2016 at 7:03 AM in reply to: New owner! Amazing but 2 issues #8656
          L-Digital
          Participant

            All right! I’m glad you didn’t give up on it. Thanks for all your effort Marqs.

            Any estimate on when it would be available.

            Also, for all the tech heads out there, what turned out to be so different to cause this issue?

            August 21, 2016 at 10:15 AM in reply to: New owner! Amazing but 2 issues #8536
            L-Digital
            Participant

              Thanks for the update. Id be happy to test any beta firmware for mine while you develop a fix.

              My unit is a MV-1FZ so hopefully it’s the same sync as the unit you are now testing

              Keep it up. I’m sure we will get there

              August 14, 2016 at 12:18 AM in reply to: New owner! Amazing but 2 issues #8409
              L-Digital
              Participant

                So I bought and sync strike to try that and it still didn’t work.

                I have a spare MVS 1FZ unit I can send to marqs as long as it will be returned. Someone else will have to provide a supergun to hook it up via Scart though.

                No game is actually needed as the system boots into a test mode when no game is connected.

                Let me know if you want me to send it over

                August 4, 2016 at 7:54 PM in reply to: Neo Geo CD #8295
                L-Digital
                Participant

                  It’s the ossc then, my mvs works on CRT, bvm, framemeister and to directly.
                  I have tried putting a 470ohm resistor on the sync line but it makes no difference. I’m hoping a firmware update will sort it out eventually

                  August 4, 2016 at 12:21 PM in reply to: Neo Geo CD #8285
                  L-Digital
                  Participant

                    I have the same problem with my MVS. I just says no sync

                    I suspect it is because neo geo have a non standard refresh rate. Yours will be too high and mine too low. I don’t know what the fox is for that. I have tried to find info on overclocking the gpu by 1% to bring it in line, but can’t find anything and it shouldn’t be necessary

                    Can marqs please take a look at neo get for the next update?

                    July 23, 2016 at 11:20 AM in reply to: New owner! Amazing but 2 issues #8102
                    L-Digital
                    Participant

                      I can do but I would need to find a Scart to VGA cable to test that. Everything else I have runs via the Scart except the Wii which is component

                      July 23, 2016 at 1:21 AM in reply to: New owner! Amazing but 2 issues #8091
                      L-Digital
                      Participant

                        So I solved most of the issues following the advice from this thread. The picture aspect was wrong on my tv.
                        Everything looks FANTASTIC. Except I still cannot get the mvs to play, even when trying marqs settings or playing around with others

                        It’s a neogeo mvs-1FZ with unibios etc. It works on CRT and framemeister no problem.

                        Once I get that going, I’m selling all my CRT. No joke. My framemeister is already history

                        July 19, 2016 at 10:27 PM in reply to: New owner! Amazing but 2 issues #8032
                        L-Digital
                        Participant

                          1. I don’t think it’s the to with the mvs. I have no problem when using Scart direct or previously through my framemeister. Is is also fine on a CRT. Maybe it’s a bug

                          2. The rolling effect is only really visible in motion. A screenshot does not pick it up. Castlevania IV when walking past the gates makes it really visible.

                          3 I’ll try that. Thanks

                        • Author
                          Posts
                        Viewing 11 posts - 1 through 11 (of 11 total)