Robertcop

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: PVM Passthrough to Tink with bnc to scart. #48281
    Robertcop
    Participant

      I kind of understand it now, I had to switch the video in to out in the female scart head. But the difference between ‘blanking ground’ and ‘video ground’ is still unclear. I got console scart cables that use either one, so they just did not care if you use extensions or switches and get problems. I mean at least the line and ground are not running along together for the length of the extension if they use the pin17 ground.

      in reply to: Voultar's RGB Bypass (8 consoles dead) #47829
      Robertcop
      Participant

        Hey buddies, I got the same issue.

        I installed it into a Japanese V6 with this video https://www.youtube.com/watch?v=KShb3YxQ4AU as a reference, but left the video chip out because Bob did that in his Video when he had Voultar on.
        I had a fine working console with a superb picture for 15 minutes. Then I wanted to load up the 240p suite and did not get a picture since then. I put the Sony chip back in, but it did not make a difference. I noticed the vdp gets hot real fast now.

        https://i.ibb.co/12k8n9g/IMG-20210608-034527.jpg

        in reply to: Passthrough possible? #26109
        Robertcop
        Participant

          How to get the analog outputs on this thing? Is there a solution i can buy?

          Do you have any idea how i get nes and c64 into the ossc if composite is not a option (i thought i can plug it into the component like so often).

        Viewing 3 posts - 1 through 3 (of 3 total)