dadjumper

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 29, 2018 at 9:35 AM in reply to: Firmware 0.81 #21241
    dadjumper
    Participant

      * hybrid scanline option added
      * fixed optimized mode mask and position inaccuracies

      Very pleased about these two additions. I’ve been using hybrid scanlines in the beta version of this FW and I really like them. They look even better than standard scanlines imo.
      Position inaccuracy was something I didn’t know was being fixed until I saw this today. Really pleased with that! Finally my Super Famicom doesn’t have a single pixel cut off on the left side. Looks perfect now.

      * pre-ADC video gain setting added

      I’m curious for more info about this. I read the separate thread in the requests forum about this feature, and I understand it’s to compensate for the 1-chip’s blown-out colours, but using various colour test patterns and adjusting this setting, I find the default of 8 actually looks the best. Are certain models less bright than others? Or is the OSSC set to compensate for this by default? Or am I just crazy?

      Edit: oh also super stoked about the display timeout feature. That’s bugged me for forever

      November 21, 2017 at 1:19 PM in reply to: Tips & Tweaks: Lx3, Lx4, Lx5 modes #17376
      dadjumper
      Participant

        polyh3dron, could you direct me to BonzoBits’ settings that you’re referring to? I wonder if that would help my situation.

        November 12, 2017 at 3:01 PM in reply to: Tips & Tweaks: Lx3, Lx4, Lx5 modes #17103
        dadjumper
        Participant

          Has there been any progress on breaking the Sony barrier? My KDL-40W730C loves 2x mode for SNES, but won’t do anything above that.
          Curiously, though, it does continue to play audio for 3x and 4x. Is this normal for other people with incompatibility issues?
          I’ve tried the settings from the OP, but have had no luck. Any Sony-specific tips I could have a go at?

          This TV does have a PC mode, and before buying the OSSC I ran some tests with nvidia’s custom resolution option. It would take pretty much anything I threw at it with the timings Marqs suggested in the thread on the shmups forums, but unfortunately that wasn’t indicitave of the OSSC itself.

          Edit: It might be worth noting that my TV will only display an image for the 4:3 mode, nothing else.
          Double edit: Reading the wiki and it says that 256×240 requires clock and phase adjustments! Will mess with that tomorrow, This could be the source of my problems…
          Edit 3: nope never mind!!

          November 12, 2017 at 2:12 PM in reply to: TV compatibility report thread #17101
          dadjumper
          Participant

            Sony KDL-40W730C

            Passthrough: N | Lx2: Y | Lx3: N | Lx4: N | Lx5: N | SNES: Y |

            Tested with SNES only, with several games. Even with PC mode on I can’t get anything above 2x to work, despite my display supporting these resolutions via a PC

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)