J5

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • October 15, 2026 at 10:13 PM in reply to: OSSC Pro firmware v0.83 #70948
    J5
    Participant

      @marqs Can you give more info about the “Basic JTAG UART serial commands” that were added? Is this like power on and power off; recalling presets Internal/SD via 3rd party control? Can you tell me pinout, baud rate, and command strings if so?

       

      Thank you!

      • This reply was modified 3 days, 14 hours ago by J5.
      June 1, 2026 at 7:52 PM in reply to: SCART distortion issue #69643
      J5
      Participant

        I think some of my cables do have all the pins. The TV does not, which pins do i remove from the SCART ends? I have some RGC cables and some others, I am happy to remove pins, do you know which pins could be problematic?

         

        Thank you!

        May 21, 2026 at 9:36 PM in reply to: OSSC Pro firmware v0.82 #69513
        J5
        Participant

          Thank you Marqs!

          May 12, 2026 at 4:49 PM in reply to: OSSC Pro Analog Out distorted #69411
          J5
          Participant

            Are you outputting 480p instead of 240p or 480i?

            April 17, 2026 at 3:54 PM in reply to: OSSC Pro Expansion out to Hydra Scart – No stable image #69203
            J5
            Participant

              Switching manually to that input results in the rolling image with Sync on green enabled, no image without sync on green enabled for RGBCS, or black and white image with RGsB and Sync on green enabled.

              April 16, 2026 at 5:30 PM in reply to: OSSC Pro Expansion out to Hydra Scart – No stable image #69194
              J5
              Participant

                So i have been told the guy who makes the Hydra Scart switchers does care to help make them compatible with scalers. He says they should only go from Games to TV. So I have connected mine from Scaler to Retrotink RGB2COMP converter and then retrotink COMP2RGB to convert back to scart and that plays nice with the Hydra. If anyone know what I could do my cables to make the signal work without those adapters Id love to know.

                April 15, 2026 at 3:35 PM in reply to: OSSC Pro Expansion out to Hydra Scart – No stable image #69182
                J5
                Participant

                  Where is the Composite Sync setting found? Thank you

                  Jon

                  February 26, 2026 at 12:44 AM in reply to: Profile includes input #68808
                  J5
                  Participant

                    Thank you Marqs.

                    Excited for your next release. Appreciate all your efforts!!!

                    February 10, 2026 at 4:27 PM in reply to: OSSC Pro – Recall Last Preset used when powered on #68618
                    J5
                    Participant

                      I re-read the JunkerHQ document and see that the unit loads Profile or Preset 0 when powered on. I saved a base preset to 0 so it least its close.

                      If its easy to have it load the last, that would be a great feature.

                      February 1, 2026 at 6:13 PM in reply to: New IR Commands #68524
                      J5
                      Participant

                        That would be amazing! Thank you so much!!

                        January 23, 2026 at 12:26 AM in reply to: OSSC Pro: Backlight/Screen Timeout #68397
                        J5
                        Participant

                          I would love this feature as well!

                          January 15, 2026 at 11:38 PM in reply to: IR hex complete codes? #68319
                          J5
                          Participant

                            Hi Marqs!

                            The most helpful addition would be Discrete On and Off IR codes. I could work around the rest, but a Toggle only power is hard to use for Automation.

                            Could you make the P1 Future code be a Power On, and P2 be Power Off @marqs ?

                            Jon

                            • This reply was modified 9 months ago by J5.
                            January 14, 2026 at 8:07 PM in reply to: IR hex complete codes? #68292
                            J5
                            Participant

                              Thank you for responding,

                              It seems that Discrete On and Off are possible, Who edits that code in the Github link above? Who would be the one to ask to maybe program P1 as Power On, P2 as Power Off, P3 to select Profile (Int) and P4 to be Profile(SD)?

                               

                              Also is there a way to access this backend code while the unit is running, like through the JTAG or something else? would be awesome to control the unit via Automation like Crestron, Savant, etc.

                              January 13, 2026 at 11:26 PM in reply to: Downscaling: Problems connecting the OSSC Pro to my CRT TV via Scart #68263
                              J5
                              Participant

                                What resolution is the output set to? You sure its set to use the CRT out not DFP? Im just trying to help. Im pretty new to OSSC Pro

                                January 13, 2026 at 3:59 PM in reply to: IR hex complete codes? #68252
                                J5
                                Participant

                                  Also, I just setup Wobbling Pixels profiles last night and I wanted to ask how we could load SD profiles from IR remote? Does the OSSC Pro have discrete on and off IR codes??

                                  Last thing for now, is there a way to dim the display on the front LCD display? Its very bright in my dark theater while playing.

                                  Thank you all,

                                  Jon

                                • Author
                                  Posts
                                Viewing 15 posts - 1 through 15 (of 15 total)